agar setiap user yang berbeda network dapat terkoneksi dengan baik lakukan konfigurasi berikut : Interface 0/1 (Network 1) Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int fa 0/1 Router(config-if)#ip address 192.168.1.1 255.255.255.0 Router(config-if)#no sh %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up Interface 0/1 (Network 2) Router(config-if)#exit Router(config)#int fa 0/0 Router(config-if)#ip address 192.168.2.1 255.255.255.0 Router(config-if)#no sh %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)# Kemudian uji koneksi antar network tersebut dengan mengirimkan PDU pada 2 PC yang berbeda network. Jika berhasil maka akan muncul pesan yang akan ditunjukkan pad...